Part Number Hot Search : 
CS842 C1001 C68HC11 T6936C ASAT10 20080 2409A 41MBC2
Product Description
Full Text Search
 

To Download P5H6RS3727 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 1.25Gbps MM Optical Transceiver Module (5V) Part NumberP5H6RS3727 1. Description
The P5H6RS3727 transceiver module uses 850nm VCSEL and high-speed/quality PIN-TIA for fiber cable 62.5/125um MMF fiber optical system and link distance up to 550m. The module supplies the differential PECL +5.0V and provides system designer with products to implement a range of Gigabit Ethernet/IEEE Draft P802.3z and DataCommunication Networks. The module was all supplied in the new industry standard 1x9 SIP package style with a duplex SC connector interface.. I /O Description
Data Input PECL compatible differential data Input to laser diode PECL compatible differential output of limiting amplifier Signal Output Alarm Function Signal Detect(SD)
2. Acronyms
SD BER TIA BOL EOL PECL PRBS LDD Signal Detect Bit Error Rate Transimpedance Amplifier Beginning Of Life End Of Life Positive Emitter Coupler Logic Pseudo Random Bit Sequence Laser Diode Driver
APAC Opto reserves the right to modify products and specifications without prior notice 7 San-Min Road, Hsinchu Industrial Park, Hukow, Hsinchu Hsien, Taiwan 303 Tel+886-3-5986799 Fax+886-3-5986655 Page 1 2002-02-22 Ver A
www.apacoe.com.tw
sales@apacoe.com.tw
1.25Gbps MM Optical Transceiver Module (5V)
3. Related documents
GR-253. CORE Issue 2. Rev 2. Jan 1999 - SONET Requirements IEEE Draft P802.3z Requirements
4. Electro-Optical Specification
All specifications apply to an operating range of 0 to + 70 unless otherwise stated. All optical powers are mean unless otherwise stated.
4.1 Absolute Maximum Ratings
If any of parameters below are exceeded, the performance specified in section 4.2 cannot be guaranteed. Parameter Storage Temperature Operating Temp. Supply Voltage Lead Soldering(Temperature) Lead Soldering(Time) Symbol Tstg Top Vo Stemp Stime MIN. -40 0 4.75 Values TYP. MAX. 85 70 5.25 260 10 Unit V Sec
4.2 Operating Characteristics
All parameters are EOL and apply over the ambient temperature -40 to + 85.
4.2.1 Electro-Optical Interface
Transmitter Side
Tc=0 to 70,Vcc=4.75 to 5.25V, Vee = GND , unless otherwise specified. Parameter Output Optical Power Optical Extinction Ratio Eye Diagram Optical Rise Time(20~80%) Optical fall Time(80~20%) Center Wavelength Spectral Width (RMS) Symbol Po Er TR TF Condition *Note1 *Note1 *Note2 *Note2 Values MIN. TYP. MAX. -9.5 -5 9 IEEE Draft P802.3z 260 260 830 860 0.85 Unit dBm dB psec psec nm nm
*Note1Measured at the end of 100m length 62.5/125um step index fiber cable using 1.25Gbps,PRBS 27-1. Signal at the beginning of life *Note2Measured using 1.25Gbps 1010 signal
APAC Opto reserves the right to modify products and specifications without prior notice 7 San-Min Road, Hsinchu Industrial Park, Hukow, Hsinchu Hsien, Taiwan 303 Tel+886-3-5986799 Fax+886-3-5986655 Page 2 2002-02-22 Ver A
www.apacoe.com.tw
sales@apacoe.com.tw
1.25Gbps MM Optical Transceiver Module (5V)
Receiver Side
Tc=0 to 70,Vcc=4.75 to 5.25V, Vee=GND, unless otherwise specified. Parameter Optical Input Wavelength Sensitivity (Input Power) SD Assert Level SD Deassert Level SD Hysteresis Symbol Pin Pa Pd Phys Condition *Note1 *Note2,3 *Note2 *Note2 MIN. 770 -18 -29 0.5 Values TYP. MAX. 860 -3 Ps+0.5 6 Unit nm dBm dBm dBm dB
1.5
*Note1BER=1x10-12,1.25Gbps,PRBS 27-1 *Note21.25Gbps, 1010 signal *Note3Ps at different sensitivity level
4.2.2 Electrical Interface
Transmitter Side
Tc=0 to 70,Vcc=4.75 to 5.25V, Vee=GND, unless otherwise specified. Parameter Supply Voltage Supply current Input Voltage (High) Input Voltage (Low) Rise Time Input Signal Fall Time Input Signal
*Note1VCCTX =5.0 V , Tc=25 *Note220%~80%
Symbol VCCTX Is VIH VIL TRIN TFIN
Condition
MIN. 4.75
VCCTX-1.17 VCCTX-1.95
Values TYP. 5
MAX. 5.25 150
VCCTX-0.73 VCCTX-1.45
Unit V mA V V psec psec
*Note1 *Note1 *Note2 *Note2
260 260
Receiver Side
Tc=0 to 70,Vcc=4.75 to 5.25V, Vee=GND, unless otherwise specified. Parameter Supply Voltage Supply Current Output Voltage (High) Output Voltage (Low) Rise Time Output Signal Fall Time Output Signal
*Note3VCCRX=5V,Tc=25 *Note420~80%
Symbol VCCRX Is VOH VOL TROUT TFOUT
Condition *Note1 *Note2,3 *Note2,3 *Note4 *Note4
MIN. 4.75
VCCRX -1.03 VCCRX -1.81
Values TYP. 5
MAX. 5.25 200
VCCRX -0.88 VCCRX -1.62
Unit V mA V V psec psec
260 260
*Note1Output currents are not included *Note2Output load resistor(RL=50 ) is connected to VCCRX -2.0V
APAC Opto reserves the right to modify products and specifications without prior notice 7 San-Min Road, Hsinchu Industrial Park, Hukow, Hsinchu Hsien, Taiwan 303 Tel+886-3-5986799 Fax+886-3-5986655 Page 3 2002-02-22 Ver A
www.apacoe.com.tw
sales@apacoe.com.tw
1.25Gbps MM Optical Transceiver Module (5V) 5. Mechanical Specification
5.1 Outline Drawing
All dimensions are in millimeters.
5.2 Pin Locations
View from the above side (i.e. through this module) PIN 1 2 3 4 5 6 7 8 9 Function Vee Rx Rx Output+ Rx OutputSD Vcc Rx Vcc Tx Tx InputTx Input+ Vee Tx
APAC Opto reserves the right to modify products and specifications without prior notice 7 San-Min Road, Hsinchu Industrial Park, Hukow, Hsinchu Hsien, Taiwan 303 Tel+886-3-5986799 Fax+886-3-5986655 Page 4 2002-02-22 Ver A
www.apacoe.com.tw
sales@apacoe.com.tw
1.25Gbps MM Optical Transceiver Module (5V)
5.3 Pin Connections
PIN FUNCTION AND SIGNAL/VOLTAGE Pin Name Function Type Pin # Description RxVEE Receiver Ground Power Supply 1 Ground RXD RXDn SD RxVCC TxVCC TxDn TxD TxVEE NC Receiver Output Data Receive Signal Detect Transmit Power Receive Power Transmitter Output Data Transmitter Ground POST PECL Compatible Output PECL Output Power Supply Power Supply PECL Compatible Output Power Supply 2 3 4 5 6 7 8 9 Receiver Output Data Inverted Receiver Output Data High = Optical Signal Present Positive Power Supply , +5V Positive Power Supply , +5V Inverted Transmitter Input Data Transmitter Input Data Ground
10-11 Not Connected
5.4 Flammability
The component will comply with flammability rating UL94V-0.
APAC Opto reserves the right to modify products and specifications without prior notice 7 San-Min Road, Hsinchu Industrial Park, Hukow, Hsinchu Hsien, Taiwan 303 Tel+886-3-5986799 Fax+886-3-5986655 Page 5 2002-02-22 Ver A
www.apacoe.com.tw
sales@apacoe.com.tw


▲Up To Search▲   

 
Price & Availability of P5H6RS3727

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X